10 In 1 Electrician Voltage Tester Sensing Screwdriver

Short Description:

Snap-in sensor:can detect AC voltage without contacting the live wires.

With removable voltage sensing module(50-600V AC).

Non magnetic bits lock system.

bits are stored in shaft and handle.

Comfort grip for efficient work.

With insulated shaft and handle.

Send email to us

Product Detail

Product Tags

Features

1.5/16 "main screwdriver blade: material / ML08A1 cold heading steel, bright chrome plating on the surface, shank inner diameter / 8.03-8.40mm, outer diameter / 10.7-11.0mm, exposed handle length / 83-90mm; black insulating toughened PP material wrapped rod, lower diameter of wrapped rod / 13.3-13.7mm, upper diameter of wrapped rod / 12.6-13.0mm; Creepage groove is added to the wrapped rod at the root of the main blade to enhance the insulation performance.

2.1 / 4 "hexagon shank: material / 50bv-30 steel, the hardness after heat treatment must reach HRC40 or above, the surface is nickel plated or bright chrome plated, the outer diameter of the shank (hexagonal edge to edge distance) / 7.85-8.0mm, and the inner diameter (hexagonal edge to edge distance) / 6.4-6.53mm; The middle of the casing is equipped with springs and steel balls, and the hardness of the steel balls is above HRC50.

3.4pcs 1 / 4 "double head screwdriver bits: Ph1 + SL3 / 16"; PH2+SL1/4”; TORX10+TORX15; R1+R2; Material / # 6150 chrome vanadium steel, hardness within HRC 48-55 after heat treatment, surface sandblasting; The outer diameter of the bit (the distance between the opposite sides of the hexagon) / 6.29-6.35mm is magnetized; After the bit is assembled to the hexagon sleeve and then to the main cutter bar, the distance from the top of the bit to the top of the main cutter bar is / 20-25mm.

4. Two colors ABS + TPR insulated handle, ABS inner core, black TPR coated rubber; The total length of the handle is 115mm. The handle is equipped with a slot for assembling sensors. The storage slot at the bottom of the slot can accommodate two screwdriver bits;

The screwdriver passed the 10000V high-voltage test without any quality problems such as breakdown and leakage, and was inspected in strict accordance with the IEC60900 standard.

5. Pushing force: sliding pushing force of inductor ≤ 0.5kg; Sensor assembly thrust ≤ 1.8kg; The disassembly tension of inductor is 0.75-2.2kg; Assembly thrust of the bit ≤ 3.0kg; The pulling force of the head is 0.6-1.4kg; Hexagon shank assembly thrust ≤ 3.0kg; The pulling force of hexagon shank is 0.7-1.8kg.

6. Torque: Torque of hexagon shank ＞ 17nm; Torque of blade and handle＞ 24nm.