Call Us
+86 133 0629 8178
E-mail
tonylu@hexon.cc

42mm PVC Pipe Cutter For Plumbers Use

Short Description:

Arc angle of cutting edge design: fine grinding and labor-saving cutting.

Ratchet system design: automatically locked during cutting to ensure no rebound. With a max cutting diameter of 42mm.

Aluminum alloy handle design: light weight, with good grip.

Buckle locked design, easy to carry.


Product Detail

Product Tags

Features

Material:

Aluminum alloyed body and handle, 8cr13 stainless steel  blade.

Surface treatment:

Overall heat treatment, high hardness, strong cutting ability and durability.

Process and Design:

Arc angle of cutting edge, fine grinding and labor-saving cutting.

Ratchet system , automatically locked during cutting to ensure no rebound. With a max cutting diameter of 42mm.

Aluminum alloy handle, light weight, with good grip.

Buckle locked design, easy to carry.

Specifications

Model

Max opening dia(mm)

Total length(mm)

Weight(g)

380010042

42

230

390

 

Product Display

380010042 (5)
380010042 (1)

Application

PVC pipe cutter can be used to cut PVC, PPV water pipes, aluminum-plastic pipes, gas pipes, electrical equipment pipes and other PVC, PPR plastic pipes.

Operation Instruction/Operation Method

1. Select a pipe cutter suitable for the pipe size, and the pipe outer diameter shall not exceed the cutting range of the corresponding cutter.

2. Mark the length to be cut before cutting

3. Then put the tube into the PVC pipie cutter edge .

4. Hold the pipe with one hand and press the cutter handle with the other hand to use the lever principle to cut thepipe by extrusion until the cutting is completed.

5. After cutting, the incision shall be clean and free of obvious burr.

Precautions

1. Select a pipe cutter of appropriate specification according to the pipe diameter to be cut, so as to avoid that the small distance between the blade and the roller is smaller than the small pipe size of the cutter of this specification.

2. Check whether all parts of the pipe cutter are in good condition.

3. Do not use excessive force to feed each time. During initial cutting, the feed amount can be slightly larger in order to cut a deeper groove.

4. When in use, a small amount of lubricating oil can be added to the moving parts of the pipe cutter and the surface of the cut pipe to reduce friction.


  • Previous:
  • Next:

  • Related Products