Features
Test unshielded network cables, with lights on: 1, 2, 3, 4, 5, 6, 7, 8;
Test the shielded network cable, with lights on: 1, 2, 3, 4, 5, 6, 7, 8, G;
Test the phone line and turn on the lights: 1, 2, 3, 4, 5, and 6;
Eight core network cable detection: Turn on the switch, plug in the wire, and the 1-8 indicator lights will light up sequentially to indicate the correct circuit.
Shielded network cable detection: Turn on the switch, plug in the wire, and after the 1-8 indicator lights turn on in sequence, the G light turns on to indicate the correct line.
Specifications
Model No | Range |
780150001 | RJ45/BNC UTP/STP/FTP/Coaxial wire |
Product Display
Application of cable tester:
This cable tester can easily solve the urgent problem of line finding, and the office/home can easily determine the corresponding relationship between the two ends through line finding.
Operation Instruction Of Cable Tester:
1. Turn the power supply to the ON position for fast scanning testing (S is the slow testing gear). The main tester lights 1, 2, 3, 4, 5, 6, 7, 8, and G flash sequentially, indicating that the machine is in normal working mode.
2. Classify the line end plugs that need to be tested and insert them into the corresponding ports of the main tester and remote tester. (It is necessary to maintain good contact between the plug and socket as much as possible. Otherwise, it will affect the scanning results.) If all wire ends of the test line are good; The indicator lights 1, 2, 3, 4, 5, 6, 7, 8, and G of the main and remote testers flash one by one. If there is no shielded wire during testing, the G light on the remote machine will not flash.
Correct wiring:
For network cable:
Main tester: 1-2-3-4-4-5-6-7-8
Remote tester: 1-2-3-4-4-6-7
For six core telephone line wiring
Legend for flashing lights when correct
Main tester: 1-2-3-4-4-5-6-7-8
Remote tester: 1-2-3-4-4-5-6
Legend for flashing lights when the wiring of the four core telephone line is correct
Main tester: 1-2-3-4-4-5-6-7-8
Remote tester: --2-3-4-5--
Legend for flashing lights when the wiring of the two core telephone line is correct
Main tester: 1-2-3-4-5-6-7-8
Remote tester: ---3-4---
If the wiring is incorrect, display mode of indicator light:
When there is a short circuit in the network cable (for example, when there is a short circuit in Line 4 or Line 5), the main tester and the remote
Tester light 4 and light 5 are not on. When several wires are short circuited, the main tester and remote
The corresponding items of the tester will not light up.
Main tester: 1-2-3-6-7-8
Remote tester: 1-2-3-6-7-8